<code id="q5arq"><ol id="q5arq"></ol></code>
<pre id="q5arq"></pre>

      服務熱線 :

      024-74565289

      13941092358

      銷售部電話:024-74565289

                           024-74606896
      技術部電話:024-74561558

      COPYRIGHT ? 2018 AIREP     ALL RIGHTS RESERVED    
      遼ICP備12000599號-1     POWERED BY 網站建設:中企動力  沈陽

      >
      >
      >
      GXS系列旋轉閃蒸干燥機
      產品名稱

      GXS系列旋轉閃蒸干燥機

      處理量(噸/日)
      降水幅度(%)
      加熱介質
      熱風溫度(℃)
      該機主要由主塔,給料器構成。濕性物料通過螺旋輸送器被送到干燥室并以高速旋轉氣流由塔底向上流動與物料充分接觸,使物料處于穩定的平衡流化狀態,在塔內攪拌器的機械沖擊和旋轉氣流動能的共同作用下,物塊被分散,形成不規劃的顆粒,較大未干顆粒向室壁運動,由于具有較大的沉降速度而落到干燥室的下部重復上一過程,隨著物料的被分散和物料間的互磨,已干的顆粒移向干燥室氣體旋轉軸心線與氣流一起被排放到物料收集器,從而得到
      產品描述
       

      二、主要結構及工作原理  /  Main structure and working principle

       

      三、性能特點  /  Performance characteristics

       

      四、使用范圍及應用實例 /  Scope of use and application examples

      一、概述 /  Overview

       

      五、主要技術參數 /  The main technical parameters

       

      58

      GXS旋轉閃蒸干燥機  /  GXS rotary flash dryer

       
       

      16.5

      1、能處理膏狀、濾餅等物料,也可處理熱敏性物料。
      與噴霧干燥相比,物料不用稀釋,減少了水分蒸發量,節能效果顯著。
      2、操作連續、停留時間短而且可以自調,并保證所干燥物料的各項工藝指標。
      3、設備占地面積小,結構緊湊,生產效率高。與噴霧干燥機相比,體積相同,產量是噴霧干燥機的七倍,能
      耗是噴霧干燥機的三分之一。把干燥和粉碎結合在一起連續進行,一次把塊狀、膏狀物料干燥成粉末成品,簡化了生產工藝,節省了設備投資。

      1. It may treat paste, cake, etc. It may also treat heat-sensitive
      materials. Compared with spray drying, the material may not be diluted
      water steam output is reduced, the effect of energy-saving is
      emarkable
      2. Operation is continuous, the staying time is short and may be
      inherently regulated, so as to guarantee each technological index of the
      material to be dried
      3. The equipment covers a small area, the structure is compact and the
      production efficiency is high Compared with spray drier, the volumes
      are the same, but the yield is seven times that of spray drier, the energy
      consumption is 1/3 that of spray drier Drying and crushing are
      combined for continuous running bulk and paste materials are dried
      once into powdery end product, the production technology is simplified
      and the investment on equipment is saved

      1.The evenness of product drying is well
      2. It may dry a great deal of material continuously, the handling capacity is great
      3. The structure is simple, the operation is convenient, it is firm and enduring, the trouble is less, the operation expense is low and the operation is reliable
      4. Operation elasticity is great, the adaptability is strong
      5. Fluid resistance is small. the resistance is 10-15 mm H20, energy is saved
      6. High temperature heat source may be used, the highest temperature may reach 400C
      7. Extent of lowering moisture could be 80-12%. The out put for wet material is 1-20tons/hour.

       

      物料名稱

       

      Material name

      進口溫度℃

      Inlet
      temperature℃

      出口溫度℃

      Outlet
      temperature℃

      進料溫度℃

      Feed
      temperature

      進料含固量%

      Feed solid
      content%

      成品含濕量%

      End product
      water content%

      平均粒度μm

      Average
      granularity

      各種漿狀金屬氫氧化物

      Various pulp metal hydroxide

      黃色氧化鐵  Yellow ferric oxide

      白云石  Dolomite

      氧化鋁  Alumina

      無水碳酸鈣 Anhydrous calcium carbonate

      酒磺  Wine

      硬脂酸鈣  Calcium stearate

      沉淀白碳黑  Settling carbon-- white

      溴氧酸  Oxybromide acid

      1-氨基蒽昆1 - aminoanth- raquinone

      250

      275

      280

      250

      280

      210

      100

      210

      251

      230

      85

      145

      100

      90

      90

      95

      52

      140

      105

      120

      15

      15

      13

      18

      13

      10

      20

      29

      28

      25

      70

      34

      35

       

      50

      43

      30

      59.7

      30

      4.5

      0.4

      0.6

      12.5

      0.3

      5.0

      0.32

      6

      1.1

      1

      40

      15

      5

      70

      50

      10

      16

      5

      3

      1

      1、產品干燥均勻性好。
      2、可大量連續干燥物料,處理量大。
      3、結構簡單,操作方便,堅固耐用,故障少,操作費用低,運轉可靠。
      4、操作彈性大,適應性強。
      5、流體阻力小,阻力為10-15mmH2O,節約能源。
      6、能使用高溫熱源,最高溫度可達400℃。
      7、降水幅度可達80~12%,產量可處理濕渣1-20噸/小時。

        GXS旋轉閃蒸干燥機是我公司硏制開發的新型干燥裝置,它巧妙的結合了粉碎技術與流態化干燥技術,能將未干物料保持在千燥段,已干物料能及時排出,物料在干燥塔內的停留時間可自行調節,并能將膏狀物料直接干燥成粉末狀成品,是化工、醫藥、陶瓷、食品行業的理想干燥設備。  

        GXS rotating flash drier is a new type of drying device developed by our factory it skillfully combines crushing technology and fluidization drying technology, it can hold the material which is not dried at the drying section, and the dried material may be discharged in time. The staying time of material in drying tower may be inherently regulated, and paste material may be directly dried into powdery end product, it is an ideal drying equipment in chemical industry medicine, ceramics and food industry

       

      規格

      Specification

      Length mm

      Width mm

      Height mm

      功率        Power KW

      給料傳動軸

      Feed drive shaft

      螺旋輸料器

      Conveyer screw

      干燥塔轉動軸

      Drying tower drive shaft

      GXS-5

      GXS-8

      GXS-10

      GXS-12

      GXS-14

      3280

      4320

      4772

      5200

      6500

      1350

      1900

      2388

      2780

      3170

      3700

      3960

      4918

      5250

      5590

      3

      7.5

      7.5

      7.5

      7.5

      2.2

      4

      4

      4

      4

      5.5

      7.5

      11

      15

      29

      未找到相應參數組,請于后臺屬性模板中添加
      暫未實現,敬請期待
      暫未實現,敬請期待
      上一篇
      下一篇
      国产伦精品一区二区三
      <code id="q5arq"><ol id="q5arq"></ol></code>
      <pre id="q5arq"></pre>